Click image to view full size image
Medical Supply Disposable Wound Protector
I. Product DescriptionOpen the wound to the greatest extent, expand the operation vision; Dispersed the tension of the incision evenly, reduce the tissue damage and postoperative pain. Open the wound to the greatest extent, expand the operation vision.
Dispersed the tension of the incision evenly, reduce the tissue damage and postoperative pain. Avoid the tissue bleeding, reduce the incision caliber.
II. Application operation
Model A is suitable for the open operation, for example, general surgery, cesarean operation, gynecological operation, and common abdominal operation.
Model B is suitable for endoscope & small caliber incision operation, for example, endoscope, thoracoscope, appendicitis operation etc.
III. External Structure
IV. Product Advantage
Avoid classII,III incision infection, avoid the tumour incision implantation metastasis, avoid the incision pollution, keep the wound moist
V. Instructions for Use
Step 1: Prepare the abdominal or thoracic cavity for the wound protector by making an incision adequate to accommodate the wound protector.
Step 2: Insert the blue distal ring of the wound protector into the incision.
Step 3: Examine and sweep the incision area to ensure that tissue is not caught between the ring and the abdominal wall.
Step 4: Grasp the grey proximal ring in a manner that your hands are opposite to each other. Pull up on the grey proximal ring ensuring that the gray distal ring is fully seated against the peritoneal layer.
Step 5: Roll the grey proximal ring by curling the top ring edge over until the ring fully inverts.
Step 6: Repeat step 5 until the incision is retracted and the wound protector is tight against the walls of the incision.
Inserting the Wound Protector
VI. Removing the Wound Protector
Step 1: If necessary, unroll the grey proximal ring of the wound protector.
Step 2: Insert hand or finger through the opening, grasp blue distal ring and pull blue distal ring out of the incision.
VII. Storage
The product shall be stored in a well-ventilated room where no corrosive gases exist and relative humidity is not more than 80%.
VIII. Specification Model & Manufacturer Contact Information
| Type | Specification | Channel diameter (mm) | Tolerance | Height (mm) | Tolerance |
| HAS QKA | 60/70-60/150 | 60 | ±10.0 | 150 | ±20.0 |
| 80/90-80/150 | 80 | ±10.0 | 150 | ±20.0 | |
| 120/130-120/250 | 120 | ±10.0 | 250 | ±40.0 | |
| 180/190-180/250 | 180 | ±10.0 | 250 | ±40.0 | |
| 220/230-220/250 | 220 | ±10.0 | 250 | ±40.0 | |
| HAS QKB | 40/30-15/20 | 15 | ±5.0 | 20 | ±5.0 |
| 50/40-15/20 | 15 | ±5.0 | 20 | ±5.0 | |
| 70/70-35/25 | 35 | ±5.0 | 25 | ±5.0 |
Address: No. 2188 Longcheng Rd, Zhonglou District, Changzhou City China
Tel: 0519-68860671
Fax: 0519-68881966
Zip Code: 213012
Web: www.hasmedicalstapler.com